Eaton PCA1V3223-100-R 10 uH Automotive PoC Chip Inductor
Eaton PCA1V3223-100-R 10 uH Automotive PoC Chip Inductor

Eaton PCA1V3223-100-R 10 uH Automotive PoC Chip Inductor

Share
PCA1V3223-100-R: power-over-coax inductor, 10 uH ±20%, Isat 500 mA, Irms – mA, DCR 400 mOhm.
    • Product Details
    • Download

    Eaton PCA1V3223-100-R 10 uH Automotive PoC Chip Inductor

    PCA1V3223-100-R at a glance: power-over-coax inductor, 10 uH ±20%, Isat 500 mA, Irms – mA, DCR 400 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberPCA1V3223-100-R
    Inductance10 uH ±20%
    DCR typical @ +20 °C400 mOhm
    Isat500 mA
    Isat2700 mA
    Isat3620 mA
    Isat4360 mA
    SRF typical100 MHz
    MountingSurface mount
    Operating temperature-55 °C to +150 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1350

    Mechanical Dimensions & Pad Layout

    PCA1V3223-100-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1350: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a chip inductor built for power-over-coax circuits: small value, low DCR, and characterised for saturation and rated current at several temperatures because the part sits in a module that heats up.

    The core stores about 1250 nJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 100 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the PCA1V3223 family this is value 5 of 7, in a range from 2.2 uH to 47 uH.

    What This Family Is For

    The PCA family is the power-over-coax range: small chip inductors for bias-tee circuits in automotive camera and radar links, characterised at multiple temperatures.

    • The bias current and the RF power share the same winding. Check the saturation margin against the sum, not just the DC component.
    • Typical applications: adas camera; srr (short range radar); lidar (light detection and ranging); vehicle communications; autonomous driving (3d mapping.
    • Design note: the impedance at the link frequency matters more than the inductance value on the label.

    Frequently Asked Questions

    Why are Isat and Irms given at several temperatures?
    The part sits in a module that heats up, and both the magnetic and the thermal limits move with temperature. The table lets the bias network be closed at the hot corner.

    Is the part AEC-Q200 qualified?
    Yes, the PCA family is qualified for automotive use, which is what a camera or radar module requires.

    What does a PoC inductor do in a camera link?
    It separates DC bias from the RF signal on a shared coax: it passes the DC with low loss and presents a high impedance to the RF band.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products