Eaton PCA1V3223-2R2-R 2.2 uH Automotive PoC Chip Inductor
Eaton PCA1V3223-2R2-R 2.2 uH Automotive PoC Chip Inductor

Eaton PCA1V3223-2R2-R 2.2 uH Automotive PoC Chip Inductor

Share
PCA1V3223-2R2-R: power-over-coax inductor, 2.2 uH ±20%, Isat 1000 mA, Irms – mA, DCR 190 mOhm.
    • Product Details
    • Download

    Eaton PCA1V3223-2R2-R 2.2 uH Automotive PoC Chip Inductor

    PCA1V3223-2R2-R at a glance: power-over-coax inductor, 2.2 uH ±20%, Isat 1000 mA, Irms – mA, DCR 190 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberPCA1V3223-2R2-R
    Inductance2.2 uH ±20%
    DCR typical @ +20 °C190 mOhm
    Isat1000 mA
    Isat21000 mA
    Isat3880 mA
    Isat4520 mA
    SRF typical200 MHz
    MountingSurface mount
    Operating temperature-55 °C to +150 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1350

    Outline Drawing

    PCA1V3223-2R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1350: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a chip inductor built for power-over-coax circuits: small value, low DCR, and characterised for saturation and rated current at several temperatures because the part sits in a module that heats up.

    The core stores about 1100 nJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 200 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the PCA1V3223 family this is value 1 of 7, in a range from 2.2 uH to 47 uH.

    Positioning in the Range

    The PCA family is the power-over-coax range: small chip inductors for bias-tee circuits in automotive camera and radar links, characterised at multiple temperatures.

    • The bias current and the RF power share the same winding. Check the saturation margin against the sum, not just the DC component.
    • Typical applications: adas camera; srr (short range radar); lidar (light detection and ranging); vehicle communications; autonomous driving (3d mapping.
    • Design note: the impedance at the link frequency matters more than the inductance value on the label.

    Frequently Asked Questions

    What does a PoC inductor do in a camera link?
    It separates DC bias from the RF signal on a shared coax: it passes the DC with low loss and presents a high impedance to the RF band.

    What matters for the RF side?
    The impedance at the link frequency, which depends on the inductance and its self-resonance. Keep the operating band below SRF.

    What matters for the RF side?
    The impedance at the link frequency, which depends on the inductance and its self-resonance. Keep the operating band below SRF.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products