Eaton PCA1V3230-2R2-R 2.2 uH Automotive PoC Chip Inductor
Eaton PCA1V3230-2R2-R 2.2 uH Automotive PoC Chip Inductor

Eaton PCA1V3230-2R2-R 2.2 uH Automotive PoC Chip Inductor

Share
PCA1V3230-2R2-R: power-over-coax inductor, 2.2 uH ±20%, Isat 2200 mA, Irms 1900 mA, DCR 100 mOhm.
    • Product Details
    • Download

    Eaton PCA1V3230-2R2-R 2.2 uH Automotive PoC Chip Inductor

    PCA1V3230-2R2-R at a glance: power-over-coax inductor, 2.2 uH ±20%, Isat 2200 mA, Irms 1900 mA, DCR 100 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberPCA1V3230-2R2-R
    Inductance2.2 uH ±20%
    DCR typical @ +20 °C100 mOhm
    DCR maximum @ +20 °C130 mOhm
    Irms (DC, 40 °C rise)1900 mA
    Irms21730 mA
    Irms31000 mA
    Isat2200 mA
    Isat21900 mA
    Isat31700 mA
    Isat41500 mA
    Isat51300 mA
    SRF typical300 MHz
    MountingSurface mount
    Operating temperature-55 °C to +140 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1355

    Dimensions and Pad Layout

    PCA1V3230-2R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1355: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    The part is an automotive PoC inductor: AEC-Q200 qualified, low profile, and specified with Isat and Irms at multiple temperatures so the bias network can be closed across the operating range.

    At 1900 A the winding dissipates about 361000 W in copper using the typical DCR of 100 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 5324 nJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 300 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the PCA1V3230 family this is value 1 of 4, in a range from 2.2 uH to 22 uH.

    Series Positioning

    The PCA family is the power-over-coax range: small chip inductors for bias-tee circuits in automotive camera and radar links, characterised at multiple temperatures.

    • The bias current and the RF power share the same winding. Check the saturation margin against the sum, not just the DC component.
    • Typical applications: adas camera; srr (short range radar); lidar (light detection and ranging); vehicle communications; autonomous driving (3d mapping).
    • Design note: the impedance at the link frequency matters more than the inductance value on the label.

    Frequently Asked Questions

    What matters for the RF side?
    The impedance at the link frequency, which depends on the inductance and its self-resonance. Keep the operating band below SRF.

    Why are Isat and Irms given at several temperatures?
    The part sits in a module that heats up, and both the magnetic and the thermal limits move with temperature. The table lets the bias network be closed at the hot corner.

    Why are Isat and Irms given at several temperatures?
    The part sits in a module that heats up, and both the magnetic and the thermal limits move with temperature. The table lets the bias network be closed at the hot corner.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products