
| Parameter | Value |
|---|---|
| Orderable part number | PCA1V3230-XXX-R |
| Inductance | 3.2 uH ±0.20% |
| DCR typical @ +20 °C | 2500 mOhm |
| Irms (DC, 40 °C rise) | 0.1 mA |
| Irms2 | 3.8 mA |
| Isat | 3 mA |
| Isat3 | 0.2 mA |
| Isat4 | 0.58 mA |
| SRF typical | 0.2 MHz |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +140 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1355 |

Drawing reproduced from Eaton Technical Data ELX1355: outline with
rated mm dimensions, pad layout and marking.
This is a chip inductor built for power-over-coax circuits: small value, low DCR, and characterised for saturation and rated current at several temperatures because the part sits in a module that heats up.
At 0.1 A the winding dissipates about 0.025 W in copper using the typical DCR of 2500 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 0.014 nJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 0.2 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the PCA1V3230 family this is value 2 of 5, in a range from 2.2 uH to 22 uH.
The PCA family is the power-over-coax range: small chip inductors for bias-tee circuits in automotive camera and radar links, characterised at multiple temperatures.
What does a PoC inductor do in a camera link?
It separates DC bias from the RF signal on a shared coax: it passes the DC with low loss and presents a high impedance to the RF band.
Is the part AEC-Q200 qualified?
Yes, the PCA family is qualified for automotive use, which is what a camera or radar module requires.
Why are Isat and Irms given at several temperatures?
The part sits in a module that heats up, and both the magnetic and the thermal limits move with temperature. The table lets the bias network be closed at the hot corner.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd