
| Parameter | Value |
|---|---|
| Orderable part number | PCA2V3223-150-R |
| Inductance | 15 uH ±20% |
| DCR typical @ +20 °C | 400 mOhm |
| Irms (DC, 40 °C rise) | 825 mA |
| Irms2 | 725 mA |
| Irms3 | 625 mA |
| Isat | 400 mA |
| Isat2 | 350 mA |
| Isat3 | 310 mA |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +150 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1351 |

Drawing reproduced from Eaton Technical Data ELX1351: outline with
rated mm dimensions, pad layout and marking.
This is a chip inductor built for power-over-coax circuits: small value, low DCR, and characterised for saturation and rated current at several temperatures because the part sits in a module that heats up.
At 825 A the winding dissipates about 272250 W in copper using the typical DCR of 400 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 1200 nJ at the saturation point, which is the energy available to bridge a load step.
Within the PCA2V3223 family this is value 4 of 4, in a range from 2.2 uH to 15 uH.
The PCA family is the power-over-coax range: small chip inductors for bias-tee circuits in automotive camera and radar links, characterised at multiple temperatures.
What does a PoC inductor do in a camera link?
It separates DC bias from the RF signal on a shared coax: it passes the DC with low loss and presents a high impedance to the RF band.
Is the part AEC-Q200 qualified?
Yes, the PCA family is qualified for automotive use, which is what a camera or radar module requires.
Why are Isat and Irms given at several temperatures?
The part sits in a module that heats up, and both the magnetic and the thermal limits move with temperature. The table lets the bias network be closed at the hot corner.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd