Eaton POEB1FB1V14W2D Power over Ethernet Transformer
Eaton POEB1FB1V14W2D Power over Ethernet Transformer

Eaton POEB1FB1V14W2D Power over Ethernet Transformer

Share
POEB1FB1V14W2D: PoE transformer, 1:0.1:0.2:0.25 turns ratio, 14 W.
    • Product Details
    • Download

    Eaton POEB1FB1V14W2D Power over Ethernet Transformer

    POEB1FB1V14W2D at a glance: PoE transformer, 1:0.1:0.2:0.25 turns ratio, 14 W.

    Electrical Specifications

    ParameterValue
    Orderable part numberPOEB1FB1V14W2D
    Output power14 W
    OCL (primary inductance)143 uH
    SCL (saturated inductance)1.5 uH
    Isat1 A
    Turns ratio pri : sec : aux1:0.1:0.2:0.25
    DCR primary440 mOhm
    DCR secondary 1110 mOhm
    DCR secondary 228 mOhm
    DCR auxiliary300 mOhm
    Schematic variantWinding arrangement 3
    Package22.3 x 17.3 x 9 mm
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1268

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data ELX1268; the package line above gives the body size where
    the data sheet states it.

    The Figures Explained

    PoE transformers are wound for a specific controller family, which is why the schematic column matters: the same core and power level can be wound as 1:0.389 or 1:0.143 depending on the output rail.

    At the 1 A saturation point the primary stores about 71.5 uJ, which sets the maximum energy per switching cycle.

    Within the POEB1FB1V14W2D family this is item 1 of 1 in the Eaton catalogue.

    Series Positioning

    The PoE range covers 3 W to 156 W of output in EFD15 to EPC46 cores, flyback and forward topologies, with schematic variants for the common controller families.

    • The isolation barrier is only as good as the board spacing around it. Check creepage on the footprint, not just the part rating.
    • Typical applications: lighting; industrial automation; security systems; voip phone systems; network and bluetooth access points.
    • Design note: check Isat at the maximum ambient, and remember that the auxiliary winding also carries current.

    Frequently Asked Questions

    What decides the turns ratio?
    The controller and the output rail. A flyback with a given primary inductance needs a specific ratio to keep the duty cycle in range at the minimum input voltage, so the ratio is set by the design, not chosen for convenience.

    Why is SCL quoted as well as OCL?
    OCL is the open-circuit inductance and SCL is the saturated value. The controller needs OCL to set the current ramp and SCL to know where the core runs out, and the gap between them is the usable current range.

    What decides the turns ratio?
    The controller and the output rail. A flyback with a given primary inductance needs a specific ratio to keep the duty cycle in range at the minimum input voltage, so the ratio is set by the design, not chosen for convenience.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message