
| Parameter | Value |
|---|---|
| Orderable part number | POEB2FB1V30W2X5 |
| Output power | 30 W |
| OCL (primary inductance) | 100 uH |
| SCL (saturated inductance) | 1 uH |
| Isat | 1 A |
| Turns ratio pri : sec : aux | 1:0.182:0.227:0.409 |
| Output configuration | (2) x 5.0 V |
| DCR primary | 100 mOhm |
| DCR secondary 1 | 7 mOhm |
| DCR secondary 2 | 70 mOhm |
| DCR auxiliary | 260 mOhm |
| Schematic variant | Winding arrangement 2 |
| Package | 29.3 x 21.8 x 12 mm |
| Mounting | Surface mount |
| Operating temperature | -40 C to +125 C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1269 |
Outline drawing, winding arrangement and recommended pad layout are on
page 2 of Eaton Technical Data ELX1269; the package line above gives the body size where
the data sheet states it.
A PoE PD flyback transformer takes the 37 to 57 V on the cable and steps it down to the rails the powered device needs, with the isolation barrier in between. The turns ratio, the primary inductance and the saturation current are set by the controller and the power level, not chosen freely.
At the 1 A saturation point the primary stores about 50 uJ, which sets the maximum energy per switching cycle.
Within the POEB2FB1V30W2X5 family this is item 1 of 1 in the Eaton catalogue.
The PoE range covers 3 W to 156 W of output in EFD15 to EPC46 cores, flyback and forward topologies, with schematic variants for the common controller families.
Why is SCL quoted as well as OCL?
OCL is the open-circuit inductance and SCL is the saturated value. The controller needs OCL to set the current ramp and SCL to know where the core runs out, and the gap between them is the usable current range.
What does the schematic number mean?
It refers to the winding arrangement drawing in the data sheet: which winding is primary, how many secondaries, and where the auxiliary sits. Two parts with the same power level and different schematic numbers are not interchangeable.
Can I use a forward part in a flyback design?
No. The two topologies need different turns ratios and different primary inductance, and a forward transformer has no gap for energy storage.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd