Eaton RL0607-180-R 18 uH Radial Inductor, 1.13 A
Eaton RL0607-180-R 18 uH Radial Inductor, 1.13 A

Eaton RL0607-180-R 18 uH Radial Inductor, 1.13 A

Share
RL0607-180-R: radial leaded drum core inductor, 18 uH , 1.13 A Irms, Isat 0.083 A, DCR 16000 mOhm.
    • Product Details
    • Download

    Eaton RL0607-180-R 18 uH Radial Inductor, 1.13 A

    RL0607-180-R at a glance: radial leaded drum core inductor, 18 uH , 1.13 A Irms, Isat 0.083 A, DCR 16000 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberRL0607-180-R
    Inductance18 uH
    DCR typical @ +20 °C16000 mOhm
    Irms (DC, 40 °C rise)1.13 A
    Isat0.083 A
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10334

    Mechanical Dimensions & Pad Layout

    RL0607-180-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10334: outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    A radial leaded drum core inductor with a protective sleeve over the winding. The leads drop into plated holes, so the part is mechanically anchored to the board rather than held by a solder fillet alone.

    At 1.13 A the winding dissipates about 20.4 W in copper using the typical DCR of 16000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 0.062 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the RL0607 family this is value 3 of 12, in a range from 6.8 uH to 1500 uH.

    Series Positioning

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliances and white goods; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    Why a sleeve over the winding?
    It protects the coil during handling and gives the part a defined outside diameter for automated placement.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products