Eaton RL0607-221-R 220 uH Unshielded Drum Core Inductor
Eaton RL0607-221-R 220 uH Unshielded Drum Core Inductor

Eaton RL0607-221-R 220 uH Unshielded Drum Core Inductor

Share
RL0607-221-R: radial leaded drum core inductor, 220 uH , 0.32 A Irms, Isat 1.1 A, DCR 3000 mOhm.
    • Product Details
    • Download

    Eaton RL0607-221-R 220 uH Unshielded Drum Core Inductor

    RL0607-221-R at a glance: radial leaded drum core inductor, 220 uH , 0.32 A Irms, Isat 1.1 A, DCR 3000 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberRL0607-221-R
    Inductance220 uH
    DCR typical @ +20 °C3000 mOhm
    Irms (DC, 40 °C rise)0.32 A
    Isat1.1 A
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10334

    Dimensions and Pad Layout

    RL0607-221-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10334: outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    Unshielded drum cores trade radiated field for inductance per unit cost. In the applications these parts serve – filters, bias supplies, low-current converters – the board has room and the field is not a problem.

    At 0.32 A the winding dissipates about 0.307 W in copper using the typical DCR of 3000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 133 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the RL0607 family this is value 8 of 12, in a range from 6.8 uH to 1500 uH.

    Positioning in the Range

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliances and white goods; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Can it be used in a switching supply?
    Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.

    Can it be used in a switching supply?
    Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products