
| Parameter | Value |
|---|---|
| Orderable part number | RL0607-470-R |
| Inductance | 47 uH |
| DCR typical @ +20 °C | 8000 mOhm |
| Irms (DC, 40 °C rise) | 0.69 A |
| Isat | 0.217 A |
| Mounting | Through-hole |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10334 |

Drawing reproduced from Eaton Technical Data 10334: outline with
rated mm dimensions, pad layout and marking.
Radial leaded inductors are the traditional choice for power supplies that are wave-soldered and repaired in the field. The sleeve protects the winding and gives the part a defined outside diameter for placement.
At 0.69 A the winding dissipates about 3.81 W in copper using the typical DCR of 8000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 1.11 uJ at the saturation point, which is the energy available to bridge a load step.
Within the RL0607 family this is value 5 of 12, in a range from 6.8 uH to 1500 uH.
The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.
Can it be used in a switching supply?
Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.
Why a sleeve over the winding?
It protects the coil during handling and gives the part a defined outside diameter for automated placement.
Is the part shielded?
No. The drum is open at the ends, so keep sensitive traces away from the axis.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd