Eaton RL0607-471-R 470 uH Radial Inductor 2000 mOhm
Eaton RL0607-471-R 470 uH Radial Inductor 2000 mOhm

Eaton RL0607-471-R 470 uH Radial Inductor 2000 mOhm

Share
RL0607-471-R: radial leaded drum core inductor, 470 uH , 0.22 A Irms, Isat 2 A, DCR 2000 mOhm.
    • Product Details
    • Download

    Eaton RL0607-471-R 470 uH Radial Inductor 2000 mOhm

    RL0607-471-R at a glance: radial leaded drum core inductor, 470 uH , 0.22 A Irms, Isat 2 A, DCR 2000 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberRL0607-471-R
    Inductance470 uH
    DCR typical @ +20 °C2000 mOhm
    Irms (DC, 40 °C rise)0.22 A
    Isat2 A
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10334

    Mechanical Drawing

    RL0607-471-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10334: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a through-hole drum core choke: ferrite drum, wound coil, heat-shrink sleeve, tinned leads. The value range runs from a few microhenry into the millihenry region.

    At 0.22 A the winding dissipates about 0.097 W in copper using the typical DCR of 2000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 940 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the RL0607 family this is value 9 of 12, in a range from 6.8 uH to 1500 uH.

    What This Family Is For

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliances and white goods; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Why a sleeve over the winding?
    It protects the coil during handling and gives the part a defined outside diameter for automated placement.

    What current can the leads carry?
    The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.

    What current can the leads carry?
    The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products