
| Parameter | Value |
|---|---|
| Orderable part number | RL0607-6R8-R |
| Inductance | 6.8 uH ±20% |
| DCR typical @ +20 °C | 38 mOhm |
| Irms (DC, 40 °C rise) | 2.23 A |
| Isat | 1.82 A |
| SRF typical | 26 MHz |
| Mounting | Through-hole |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10334 |

Drawing reproduced from Eaton Technical Data 10334: outline with
rated mm dimensions, pad layout and marking.
Radial leaded inductors are the traditional choice for power supplies that are wave-soldered and repaired in the field. The sleeve protects the winding and gives the part a defined outside diameter for placement.
At 2.23 A the winding dissipates about 0.189 W in copper using the typical DCR of 38 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 11.3 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 26 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the RL0607 family this is value 1 of 12, in a range from 6.8 uH to 1500 uH.
The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.
Can it be used in a switching supply?
Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.
Why a sleeve over the winding?
It protects the coil during handling and gives the part a defined outside diameter for automated placement.
What current can the leads carry?
The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd