Eaton RL0607-821-R 820 uH Leaded Drum Core Inductor
Eaton RL0607-821-R 820 uH Leaded Drum Core Inductor

Eaton RL0607-821-R 820 uH Leaded Drum Core Inductor

Share
RL0607-821-R: radial leaded drum core inductor, 820 uH , 0.17 A Irms, Isat 4.13 A, DCR 2000 mOhm.
    • Product Details
    • Download

    Eaton RL0607-821-R 820 uH Leaded Drum Core Inductor

    RL0607-821-R at a glance: radial leaded drum core inductor, 820 uH , 0.17 A Irms, Isat 4.13 A, DCR 2000 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberRL0607-821-R
    Inductance820 uH
    DCR typical @ +20 °C2000 mOhm
    Irms (DC, 40 °C rise)0.17 A
    Isat4.13 A
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10334

    Dimensions and Pad Layout

    RL0607-821-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10334: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a through-hole drum core choke: ferrite drum, wound coil, heat-shrink sleeve, tinned leads. The value range runs from a few microhenry into the millihenry region.

    At 0.17 A the winding dissipates about 0.058 W in copper using the typical DCR of 2000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 6993 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the RL0607 family this is value 10 of 12, in a range from 6.8 uH to 1500 uH.

    What This Family Is For

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliances and white goods; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Why a sleeve over the winding?
    It protects the coil during handling and gives the part a defined outside diameter for automated placement.

    What current can the leads carry?
    The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products