Eaton RL0809-100-R 9.65 uH Radial Inductor 31 mOhm
Eaton RL0809-100-R 9.65 uH Radial Inductor 31 mOhm

Eaton RL0809-100-R 9.65 uH Radial Inductor 31 mOhm

Share
RL0809-100-R: radial leaded drum core inductor, 9.65 uH , 2.9 A Irms, Isat 2.47 A, DCR 31 mOhm.
    • Product Details
    • Download

    Eaton RL0809-100-R 9.65 uH Radial Inductor 31 mOhm

    RL0809-100-R at a glance: radial leaded drum core inductor, 9.65 uH , 2.9 A Irms, Isat 2.47 A, DCR 31 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberRL0809-100-R
    Inductance9.65 uH
    DCR typical @ +20 °C31 mOhm
    Irms (DC, 40 °C rise)2.9 A
    Isat2.47 A
    SRF typical18 MHz
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10279

    Dimensions and Pad Layout

    RL0809-100-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10279: outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    A radial leaded drum core inductor with a protective sleeve over the winding. The leads drop into plated holes, so the part is mechanically anchored to the board rather than held by a solder fillet alone.

    At 2.9 A the winding dissipates about 0.261 W in copper using the typical DCR of 31 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 29.4 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 18 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the RL0809 family this is value 1 of 12, in a range from 9.65 uH to 32998 uH.

    Positioning in the Range

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliance electronics; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    Can it be used in a switching supply?
    Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products