Eaton RL0809-152-R 1504 uH Radial Inductor, 0.255 A
Eaton RL0809-152-R 1504 uH Radial Inductor, 0.255 A

Eaton RL0809-152-R 1504 uH Radial Inductor, 0.255 A

Share
RL0809-152-R: radial leaded drum core inductor, 1504 uH , 0.255 A Irms, Isat 0.198 A, DCR 4000 mOhm.
    • Product Details
    • Download

    Eaton RL0809-152-R 1504 uH Radial Inductor, 0.255 A

    RL0809-152-R at a glance: radial leaded drum core inductor, 1504 uH , 0.255 A Irms, Isat 0.198 A, DCR 4000 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberRL0809-152-R
    Inductance1504 uH
    DCR typical @ +20 °C4000 mOhm
    Irms (DC, 40 °C rise)0.255 A
    Isat0.198 A
    SRF typical2 MHz
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10279

    Mechanical Drawing

    RL0809-152-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10279: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is a through-hole drum core choke: ferrite drum, wound coil, heat-shrink sleeve, tinned leads. The value range runs from a few microhenry into the millihenry region.

    At 0.255 A the winding dissipates about 0.26 W in copper using the typical DCR of 4000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 29.5 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 2 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the RL0809 family this is value 3 of 12, in a range from 9.65 uH to 32998 uH.

    Positioning in the Range

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliance electronics; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    Can it be used in a switching supply?
    Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.

    What current can the leads carry?
    The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products