Eaton RL0809-222-R 2204 uH Radial Inductor 6060 mOhm
Eaton RL0809-222-R 2204 uH Radial Inductor 6060 mOhm

Eaton RL0809-222-R 2204 uH Radial Inductor 6060 mOhm

Share
RL0809-222-R: radial leaded drum core inductor, 2204 uH , 0.207 A Irms, Isat 0.164 A, DCR 6060 mOhm.
    • Product Details
    • Download

    Eaton RL0809-222-R 2204 uH Radial Inductor 6060 mOhm

    RL0809-222-R at a glance: radial leaded drum core inductor, 2204 uH , 0.207 A Irms, Isat 0.164 A, DCR 6060 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberRL0809-222-R
    Inductance2204 uH
    DCR typical @ +20 °C6060 mOhm
    Irms (DC, 40 °C rise)0.207 A
    Isat0.164 A
    SRF typical1 MHz
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10279

    Outline Drawing

    RL0809-222-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10279: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Radial leaded inductors are the traditional choice for power supplies that are wave-soldered and repaired in the field. The sleeve protects the winding and gives the part a defined outside diameter for placement.

    At 0.207 A the winding dissipates about 0.26 W in copper using the typical DCR of 6060 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 29.6 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 1 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the RL0809 family this is value 5 of 12, in a range from 9.65 uH to 32998 uH.

    Where This Series Fits

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliance electronics; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    What current can the leads carry?
    The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.

    Why a sleeve over the winding?
    It protects the coil during handling and gives the part a defined outside diameter for automated placement.

    Can it be used in a switching supply?
    Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products