
| Parameter | Value |
|---|---|
| Orderable part number | RL0809-223-R |
| Inductance | 21989 uH |
| DCR typical @ +20 °C | 59700 mOhm |
| Irms (DC, 40 °C rise) | 0.07 A |
| Isat | 0.052 A |
| SRF typical | 0.39 MHz |
| Mounting | Through-hole |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10279 |

Drawing reproduced from Eaton Technical Data 10279: outline with
rated mm dimensions, pad layout and marking.
A radial leaded drum core inductor with a protective sleeve over the winding. The leads drop into plated holes, so the part is mechanically anchored to the board rather than held by a solder fillet alone.
At 0.07 A the winding dissipates about 0.293 W in copper using the typical DCR of 59700 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 29.7 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 0.39 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the RL0809 family this is value 11 of 12, in a range from 9.65 uH to 32998 uH.
The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.
Is the part shielded?
No. The drum is open at the ends, so keep sensitive traces away from the axis.
Why a sleeve over the winding?
It protects the coil during handling and gives the part a defined outside diameter for automated placement.
Why a sleeve over the winding?
It protects the coil during handling and gives the part a defined outside diameter for automated placement.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd