Eaton RL0809-333-R 32998 uH Unshielded Drum Core Inductor
Eaton RL0809-333-R 32998 uH Unshielded Drum Core Inductor

Eaton RL0809-333-R 32998 uH Unshielded Drum Core Inductor

Share
RL0809-333-R: radial leaded drum core inductor, 32998 uH , 0.058 A Irms, Isat 0.042 A, DCR 78900 mOhm.
    • Product Details
    • Download

    Eaton RL0809-333-R 32998 uH Unshielded Drum Core Inductor

    RL0809-333-R at a glance: radial leaded drum core inductor, 32998 uH , 0.058 A Irms, Isat 0.042 A, DCR 78900 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberRL0809-333-R
    Inductance32998 uH
    DCR typical @ +20 °C78900 mOhm
    Irms (DC, 40 °C rise)0.058 A
    Isat0.042 A
    SRF typical0.31 MHz
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10279

    Dimensions and Pad Layout

    RL0809-333-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10279: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    Unshielded drum cores trade radiated field for inductance per unit cost. In the applications these parts serve – filters, bias supplies, low-current converters – the board has room and the field is not a problem.

    At 0.058 A the winding dissipates about 0.265 W in copper using the typical DCR of 78900 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 29.1 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 0.31 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the RL0809 family this is value 12 of 12, in a range from 9.65 uH to 32998 uH.

    Series Positioning

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliance electronics; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Can it be used in a switching supply?
    Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message