Eaton RL0809-682-R 6796 uH Radial Inductor, 0.123 A
Eaton RL0809-682-R 6796 uH Radial Inductor, 0.123 A

Eaton RL0809-682-R 6796 uH Radial Inductor, 0.123 A

Share
RL0809-682-R: radial leaded drum core inductor, 6796 uH , 0.123 A Irms, Isat 0.093 A, DCR 17300 mOhm.
    • Product Details
    • Download

    Eaton RL0809-682-R 6796 uH Radial Inductor, 0.123 A

    RL0809-682-R at a glance: radial leaded drum core inductor, 6796 uH , 0.123 A Irms, Isat 0.093 A, DCR 17300 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberRL0809-682-R
    Inductance6796 uH
    DCR typical @ +20 °C17300 mOhm
    Irms (DC, 40 °C rise)0.123 A
    Isat0.093 A
    SRF typical0.69 MHz
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10279

    Dimensions and Pad Layout

    RL0809-682-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10279: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is a through-hole drum core choke: ferrite drum, wound coil, heat-shrink sleeve, tinned leads. The value range runs from a few microhenry into the millihenry region.

    At 0.123 A the winding dissipates about 0.262 W in copper using the typical DCR of 17300 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 29.4 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 0.69 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the RL0809 family this is value 7 of 12, in a range from 9.65 uH to 32998 uH.

    What This Family Is For

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliance electronics; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    What current can the leads carry?
    The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products