Eaton RL1011-151-R 148 uH Unshielded Drum Core Inductor
Eaton RL1011-151-R 148 uH Unshielded Drum Core Inductor

Eaton RL1011-151-R 148 uH Unshielded Drum Core Inductor

Share
RL1011-151-R: radial leaded drum core inductor, 148 uH , 1.02 A Irms, Isat 1.23 A, DCR 301 mOhm.
    • Product Details
    • Download

    Eaton RL1011-151-R 148 uH Unshielded Drum Core Inductor

    RL1011-151-R at a glance: radial leaded drum core inductor, 148 uH , 1.02 A Irms, Isat 1.23 A, DCR 301 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberRL1011-151-R
    Inductance148 uH
    DCR typical @ +20 °C301 mOhm
    Irms (DC, 40 °C rise)1.02 A
    Isat1.23 A
    SRF typical3 MHz
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10278

    Mechanical Dimensions & Pad Layout

    RL1011-151-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10278: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    Unshielded drum cores trade radiated field for inductance per unit cost. In the applications these parts serve – filters, bias supplies, low-current converters – the board has room and the field is not a problem.

    At 1.02 A the winding dissipates about 0.313 W in copper using the typical DCR of 301 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 112 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 3 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the RL1011 family this is value 11 of 19, in a range from 4.43 uH to 2204 uH.

    Where This Series Fits

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliance electronics; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    What current can the leads carry?
    The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.

    Why a sleeve over the winding?
    It protects the coil during handling and gives the part a defined outside diameter for automated placement.

    Why a sleeve over the winding?
    It protects the coil during handling and gives the part a defined outside diameter for automated placement.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products