
| Parameter | Value |
|---|---|
| Orderable part number | RL1011-181-R |
| Inductance | 181 uH |
| DCR typical @ +20 °C | 330 mOhm |
| Irms (DC, 40 °C rise) | 0.959 A |
| Isat | 1.11 A |
| SRF typical | 3 MHz |
| Mounting | Through-hole |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10278 |

Drawing reproduced from Eaton Technical Data 10278: outline with
rated mm dimensions, pad layout and marking.
Radial leaded inductors are the traditional choice for power supplies that are wave-soldered and repaired in the field. The sleeve protects the winding and gives the part a defined outside diameter for placement.
At 0.959 A the winding dissipates about 0.303 W in copper using the typical DCR of 330 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 112 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 3 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the RL1011 family this is value 12 of 19, in a range from 4.43 uH to 2204 uH.
The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.
Can it be used in a switching supply?
Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.
Can it be used in a switching supply?
Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.
Is the part shielded?
No. The drum is open at the ends, so keep sensitive traces away from the axis.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd