Eaton RL1011-221-R 223 uH Leaded Drum Core Inductor
Eaton RL1011-221-R 223 uH Leaded Drum Core Inductor

Eaton RL1011-221-R 223 uH Leaded Drum Core Inductor

Share
RL1011-221-R: radial leaded drum core inductor, 223 uH , 0.831 A Irms, Isat 1 A, DCR 454 mOhm.
    • Product Details
    • Download

    Eaton RL1011-221-R 223 uH Leaded Drum Core Inductor

    RL1011-221-R at a glance: radial leaded drum core inductor, 223 uH , 0.831 A Irms, Isat 1 A, DCR 454 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberRL1011-221-R
    Inductance223 uH
    DCR typical @ +20 °C454 mOhm
    Irms (DC, 40 °C rise)0.831 A
    Isat1 A
    SRF typical3 MHz
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10278

    Mechanical Dimensions & Pad Layout

    RL1011-221-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10278: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a through-hole drum core choke: ferrite drum, wound coil, heat-shrink sleeve, tinned leads. The value range runs from a few microhenry into the millihenry region.

    At 0.831 A the winding dissipates about 0.314 W in copper using the typical DCR of 454 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 112 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 3 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the RL1011 family this is value 13 of 19, in a range from 4.43 uH to 2204 uH.

    Where This Series Fits

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliance electronics; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Why a sleeve over the winding?
    It protects the coil during handling and gives the part a defined outside diameter for automated placement.

    Why a sleeve over the winding?
    It protects the coil during handling and gives the part a defined outside diameter for automated placement.

    Why a sleeve over the winding?
    It protects the coil during handling and gives the part a defined outside diameter for automated placement.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products