Eaton RL1218-101-R 100 uH Leaded Drum Core Inductor
Eaton RL1218-101-R 100 uH Leaded Drum Core Inductor

Eaton RL1218-101-R 100 uH Leaded Drum Core Inductor

Share
RL1218-101-R: radial leaded drum core inductor, 100 uH , 2.31 A Irms, Isat 3.16 A, DCR 102 mOhm.
    • Product Details
    • Download

    Eaton RL1218-101-R 100 uH Leaded Drum Core Inductor

    RL1218-101-R at a glance: radial leaded drum core inductor, 100 uH , 2.31 A Irms, Isat 3.16 A, DCR 102 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberRL1218-101-R
    Inductance100 uH
    DCR typical @ +20 °C102 mOhm
    Irms (DC, 40 °C rise)2.31 A
    Isat3.16 A
    SRF typical3 MHz
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10338

    Outline Drawing

    RL1218-101-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10338: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    Radial leaded inductors are the traditional choice for power supplies that are wave-soldered and repaired in the field. The sleeve protects the winding and gives the part a defined outside diameter for placement.

    At 2.31 A the winding dissipates about 0.544 W in copper using the typical DCR of 102 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 499 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 3 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the RL1218 family this is value 8 of 19, in a range from 4.7 uH to 12000 uH.

    Positioning in the Range

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliances and white goods; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Can it be used in a switching supply?
    Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.

    Can it be used in a switching supply?
    Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.

    Can it be used in a switching supply?
    Yes, at the switching frequencies its core loss allows. Compare the core loss curve before assuming the DC rating is the limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message