Eaton RL1218-221-R 220 uH Radial Inductor 241 mOhm
Eaton RL1218-221-R 220 uH Radial Inductor 241 mOhm

Eaton RL1218-221-R 220 uH Radial Inductor 241 mOhm

Share
RL1218-221-R: radial leaded drum core inductor, 220 uH , 1.53 A Irms, Isat 2.1 A, DCR 241 mOhm.
    • Product Details
    • Download

    Eaton RL1218-221-R 220 uH Radial Inductor 241 mOhm

    RL1218-221-R at a glance: radial leaded drum core inductor, 220 uH , 1.53 A Irms, Isat 2.1 A, DCR 241 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberRL1218-221-R
    Inductance220 uH
    DCR typical @ +20 °C241 mOhm
    Irms (DC, 40 °C rise)1.53 A
    Isat2.1 A
    SRF typical2 MHz
    MountingThrough-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10338

    Mechanical Drawing

    RL1218-221-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10338: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is a through-hole drum core choke: ferrite drum, wound coil, heat-shrink sleeve, tinned leads. The value range runs from a few microhenry into the millihenry region.

    At 1.53 A the winding dissipates about 0.564 W in copper using the typical DCR of 241 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 485 uJ at the saturation point, which is the energy available to bridge a load step.

    Self-resonance is 2 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.

    Within the RL1218 family this is value 11 of 19, in a range from 4.7 uH to 12000 uH.

    Where This Series Fits

    The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.

    • The leads and the plated holes are part of the current path. Check them, not just the winding, against the rated current.
    • Typical applications: led drivers and lighting; utility meters; appliances and white goods; motor drives; power supplies.
    • Design note: leave clearance around the part for the sleeve and for the field. The inductance depends on nearby metal.

    Frequently Asked Questions

    Is the part shielded?
    No. The drum is open at the ends, so keep sensitive traces away from the axis.

    Why a sleeve over the winding?
    It protects the coil during handling and gives the part a defined outside diameter for automated placement.

    What current can the leads carry?
    The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products