
| Parameter | Value |
|---|---|
| Orderable part number | RL1218-562-R |
| Inductance | 5600 uH |
| DCR typical @ +20 °C | 6110 mOhm |
| Irms (DC, 40 °C rise) | 0.305 A |
| Isat | 0.418 A |
| SRF typical | 0.4 MHz |
| Mounting | Through-hole |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 10338 |

Drawing reproduced from Eaton Technical Data 10338: outline with
rated mm dimensions, pad layout and marking.
Radial leaded inductors are the traditional choice for power supplies that are wave-soldered and repaired in the field. The sleeve protects the winding and gives the part a defined outside diameter for placement.
At 0.305 A the winding dissipates about 0.568 W in copper using the typical DCR of 6110 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 489 uJ at the saturation point, which is the energy available to bridge a load step.
Self-resonance is 0.4 MHz typical. Keep the operating band, and the harmonics that carry energy, below it.
Within the RL1218 family this is value 17 of 19, in a range from 4.7 uH to 12000 uH.
The RL family is the radial leaded drum core range: through-hole parts with a protective sleeve, covering microhenry to millihenry values.
What current can the leads carry?
The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.
Is the part shielded?
No. The drum is open at the ends, so keep sensitive traces away from the axis.
What current can the leads carry?
The Irms column is the thermal rating for the part; the lead and the plated hole also have to be checked at that current.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd