
| Parameter | Value |
|---|---|
| Orderable part number | SD10-151-R |
| Rated inductance | 150 uH |
| OCL (open circuit inductance) | 149 uH |
| DCR typical @ +20 °C | 4150 mOhm |
| Irms (DC, 40 °C rise) | 0.2 A |
| Isat | 0.195 A |
| Volt-time rating | 38.1 V-us |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data |

Drawing reproduced from Eaton Technical Data : outline with
rated mm dimensions, pad layout and marking.
Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.
At 0.2 A the winding dissipates about 0.166 W in copper using the typical DCR of 4150 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 2.84 uJ at the saturation point, which is the energy available to bridge a load step.
Within the SD10 family this is value 17 of 20, in a range from 0.453 uH to 468 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
Is the part suitable for a switching converter?
Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.
What does the shield actually do?
It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.
What is the Volt-us column?
The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd