Eaton SD10-330-R 32.2 uH Drum Core Inductor 981 mOhm
Eaton SD10-330-R 32.2 uH Drum Core Inductor 981 mOhm

Eaton SD10-330-R 32.2 uH Drum Core Inductor 981 mOhm

Share
SD10-330-R: shielded drum core inductor, 32.2 uH , 0.412 A Irms, Isat 0.42 A, DCR 981 mOhm.
    • Product Details
    • Download

    Eaton SD10-330-R 32.2 uH Drum Core Inductor 981 mOhm

    SD10-330-R at a glance: shielded drum core inductor, 32.2 uH , 0.412 A Irms, Isat 0.42 A, DCR 981 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSD10-330-R
    Rated inductance33 uH
    OCL (open circuit inductance)32.2 uH
    DCR typical @ +20 °C981 mOhm
    Irms (DC, 40 °C rise)0.412 A
    Isat0.42 A
    Volt-time rating17.7 V-us
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data

    Dimensions and Pad Layout

    SD10-330-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data : outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    This is the classic shielded SMD drum inductor: ferrite drum, wound coil, shield sleeve, tinned terminations. It is the workhorse part for DC-DC converters that need a few microhenry at a few amps.

    At 0.412 A the winding dissipates about 0.166 W in copper using the typical DCR of 981 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 2.84 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SD10 family this is value 12 of 20, in a range from 0.453 uH to 468 uH.

    Positioning in the Range

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: digital cameras; media players; mobile phones; hand held equipment; pcmcia cards.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message