Eaton SD10-331-R 330 uH Shielded Inductor, Isat 0.131 A
Eaton SD10-331-R 330 uH Shielded Inductor, Isat 0.131 A

Eaton SD10-331-R 330 uH Shielded Inductor, Isat 0.131 A

Share
SD10-331-R: shielded drum core inductor, 330 uH , 0.13 A Irms, Isat 0.131 A, DCR 9830 mOhm.
    • Product Details
    • Download

    Eaton SD10-331-R 330 uH Shielded Inductor, Isat 0.131 A

    SD10-331-R at a glance: shielded drum core inductor, 330 uH , 0.13 A Irms, Isat 0.131 A, DCR 9830 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSD10-331-R
    Rated inductance330 uH
    OCL (open circuit inductance)330 uH
    DCR typical @ +20 °C9830 mOhm
    Irms (DC, 40 °C rise)0.13 A
    Isat0.131 A
    Volt-time rating56.7 V-us
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data

    Dimensions and Pad Layout

    SD10-331-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data : outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.

    At 0.13 A the winding dissipates about 0.166 W in copper using the typical DCR of 9830 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 2.83 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SD10 family this is value 19 of 20, in a range from 0.453 uH to 468 uH.

    Where This Series Fits

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: digital cameras; media players; mobile phones; hand held equipment; pcmcia cards.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products