Eaton SD14-1R5-R 1.63 uH Drum Core Inductor 39 mOhm
Eaton SD14-1R5-R 1.63 uH Drum Core Inductor 39 mOhm

Eaton SD14-1R5-R 1.63 uH Drum Core Inductor 39 mOhm

Share
SD14-1R5-R: shielded drum core inductor, 1.63 uH , 2.53 A Irms, Isat 2.91 A, DCR 39 mOhm.
    • Product Details
    • Download

    Eaton SD14-1R5-R 1.63 uH Drum Core Inductor 39 mOhm

    SD14-1R5-R at a glance: shielded drum core inductor, 1.63 uH , 2.53 A Irms, Isat 2.91 A, DCR 39 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSD14-1R5-R
    Rated inductance1.5 uH
    OCL (open circuit inductance)1.63 uH
    DCR typical @ +20 °C39 mOhm
    Irms (DC, 40 °C rise)2.53 A
    Isat2.91 A
    Volt-time rating5.63 V-us
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data

    Outline Drawing

    SD14-1R5-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data : outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    A shielded drum core inductor: the winding sits on a drum-shaped ferrite core and a shield sleeve closes the magnetic path around it. That is what keeps the radiated field low enough to place the part next to other circuitry.

    At 2.53 A the winding dissipates about 0.25 W in copper using the typical DCR of 39 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 6.9 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SD14 family this is value 4 of 25, in a range from 0.61 uH to 1008 uH.

    Where This Series Fits

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: digital cameras; media players; mobile phones; hand held equipment; pcmcia cards.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products