Eaton SD20-220-R 22.1 uH Drum Core Inductor 205 mOhm
Eaton SD20-220-R 22.1 uH Drum Core Inductor 205 mOhm

Eaton SD20-220-R 22.1 uH Drum Core Inductor 205 mOhm

Share
SD20-220-R: shielded drum core inductor, 22.1 uH , 1.12 A Irms, Isat 0.596 A, DCR 205 mOhm.
    • Product Details
    • Download

    Eaton SD20-220-R 22.1 uH Drum Core Inductor 205 mOhm

    SD20-220-R at a glance: shielded drum core inductor, 22.1 uH , 1.12 A Irms, Isat 0.596 A, DCR 205 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberSD20-220-R
    Rated inductance22 uH
    OCL (open circuit inductance)22.1 uH
    DCR typical @ +20 °C205 mOhm
    Irms (DC, 40 °C rise)1.12 A
    Isat0.596 A
    Volt-time rating15.3 V-us
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data

    Mechanical Drawing

    SD20-220-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data : outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.

    At 1.12 A the winding dissipates about 0.258 W in copper using the typical DCR of 205 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 3.92 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SD20 family this is value 11 of 23, in a range from 0.49 uH to 1005 uH.

    What This Family Is For

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: digital cameras; media players; mobile phones; hand held equipment; pcmcia cards.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products