Eaton SD20-331-R 328 uH Drum Core Inductor 2990 mOhm
Eaton SD20-331-R 328 uH Drum Core Inductor 2990 mOhm

Eaton SD20-331-R 328 uH Drum Core Inductor 2990 mOhm

Share
SD20-331-R: shielded drum core inductor, 328 uH , 0.294 A Irms, Isat 0.155 A, DCR 2990 mOhm.
    • Product Details
    • Download

    Eaton SD20-331-R 328 uH Drum Core Inductor 2990 mOhm

    SD20-331-R at a glance: shielded drum core inductor, 328 uH , 0.294 A Irms, Isat 0.155 A, DCR 2990 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSD20-331-R
    Rated inductance330 uH
    OCL (open circuit inductance)328 uH
    DCR typical @ +20 °C2990 mOhm
    Irms (DC, 40 °C rise)0.294 A
    Isat0.155 A
    Volt-time rating58.8 V-us
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data

    Dimensions and Pad Layout

    SD20-331-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data : outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is the classic shielded SMD drum inductor: ferrite drum, wound coil, shield sleeve, tinned terminations. It is the workhorse part for DC-DC converters that need a few microhenry at a few amps.

    At 0.294 A the winding dissipates about 0.258 W in copper using the typical DCR of 2990 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 3.94 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SD20 family this is value 19 of 23, in a range from 0.49 uH to 1005 uH.

    Where This Series Fits

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: digital cameras; media players; mobile phones; hand held equipment; pcmcia cards.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products