Eaton SD20-470-R 47.6 uH SMD Power Inductor
Eaton SD20-470-R 47.6 uH SMD Power Inductor

Eaton SD20-470-R 47.6 uH SMD Power Inductor

Share
SD20-470-R: shielded drum core inductor, 47.6 uH , 0.745 A Irms, Isat 0.406 A, DCR 465 mOhm.
    • Product Details
    • Download

    Eaton SD20-470-R 47.6 uH SMD Power Inductor

    SD20-470-R at a glance: shielded drum core inductor, 47.6 uH , 0.745 A Irms, Isat 0.406 A, DCR 465 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberSD20-470-R
    Rated inductance47 uH
    OCL (open circuit inductance)47.6 uH
    DCR typical @ +20 °C465 mOhm
    Irms (DC, 40 °C rise)0.745 A
    Isat0.406 A
    Volt-time rating22.4 V-us
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data

    Outline Drawing

    SD20-470-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data : outline with
    rated mm dimensions, pad layout and marking.

    What the Numbers Mean

    The drum core concentrates the flux and the shield closes the return path, so this family behaves more like a closed-core part than an open drum while keeping the inductance-per-volume advantage of a wound component.

    At 0.745 A the winding dissipates about 0.258 W in copper using the typical DCR of 465 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 3.92 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SD20 family this is value 13 of 23, in a range from 0.49 uH to 1005 uH.

    Positioning in the Range

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: digital cameras; media players; mobile phones; hand held equipment; pcmcia cards.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products