Eaton SD25-150-R 14.4 uH Drum Core Inductor 95.6 mOhm
Eaton SD25-150-R 14.4 uH Drum Core Inductor 95.6 mOhm

Eaton SD25-150-R 14.4 uH Drum Core Inductor 95.6 mOhm

Share
SD25-150-R: shielded drum core inductor, 14.4 uH , 1.67 A Irms, Isat 1.08 A, DCR 95.6 mOhm.
    • Product Details
    • Download

    Eaton SD25-150-R 14.4 uH Drum Core Inductor 95.6 mOhm

    SD25-150-R at a glance: shielded drum core inductor, 14.4 uH , 1.67 A Irms, Isat 1.08 A, DCR 95.6 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSD25-150-R
    Rated inductance15 uH
    OCL (open circuit inductance)14.4 uH
    DCR typical @ +20 °C95.6 mOhm
    Irms (DC, 40 °C rise)1.67 A
    Isat1.08 A
    Volt-time rating11.9 V-us
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data

    Outline Drawing

    SD25-150-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data : outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.

    At 1.67 A the winding dissipates about 0.267 W in copper using the typical DCR of 95.6 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 8.43 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SD25 family this is value 11 of 24, in a range from 0.466 uH to 1003 uH.

    Series Positioning

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: digital cameras; media players; mobile phones; hand held equipment; pcmcia cards.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products