
| Parameter | Value |
|---|---|
| Orderable part number | SD25-220-R |
| Rated inductance | 22 uH |
| OCL (open circuit inductance) | 22.8 uH |
| DCR typical @ +20 °C | 148 mOhm |
| Irms (DC, 40 °C rise) | 1.34 A |
| Isat | 0.857 A |
| Volt-time rating | 14.9 V-us |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data |

Drawing reproduced from Eaton Technical Data : outline with
rated mm dimensions, pad layout and marking.
The drum core concentrates the flux and the shield closes the return path, so this family behaves more like a closed-core part than an open drum while keeping the inductance-per-volume advantage of a wound component.
At 1.34 A the winding dissipates about 0.265 W in copper using the typical DCR of 148 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 8.38 uJ at the saturation point, which is the energy available to bridge a load step.
Within the SD25 family this is value 12 of 24, in a range from 0.466 uH to 1003 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
Is the part suitable for a switching converter?
Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.
What is the Volt-us column?
The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd