
| Parameter | Value |
|---|---|
| Orderable part number | SD25-820-R |
| Rated inductance | 82 uH |
| OCL (open circuit inductance) | 82.2 uH |
| DCR typical @ +20 °C | 524 mOhm |
| Irms (DC, 40 °C rise) | 0.713 A |
| Isat | 0.441 A |
| Volt-time rating | 28.3 V-us |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data |

Drawing reproduced from Eaton Technical Data : outline with
rated mm dimensions, pad layout and marking.
A shielded drum core inductor: the winding sits on a drum-shaped ferrite core and a shield sleeve closes the magnetic path around it. That is what keeps the radiated field low enough to place the part next to other circuitry.
At 0.713 A the winding dissipates about 0.266 W in copper using the typical DCR of 524 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 7.99 uJ at the saturation point, which is the energy available to bridge a load step.
Within the SD25 family this is value 16 of 24, in a range from 0.466 uH to 1003 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
What is the Volt-us column?
The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.
What is the Volt-us column?
The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd