
| Parameter | Value |
|---|---|
| Orderable part number | SD3814-101-R |
| Rated inductance | 100 uH |
| OCL (open circuit inductance) | 98.8 uH |
| DCR typical @ +20 °C | 228 mOhm |
| Volt-time rating | 0.268 V-us |
| Package | 38 x 14 mm |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4318 |

Drawing reproduced from Eaton Technical Data 4318: outline with
rated mm dimensions, pad layout and marking.
A shielded drum core inductor: the winding sits on a drum-shaped ferrite core and a shield sleeve closes the magnetic path around it. That is what keeps the radiated field low enough to place the part next to other circuitry.
Within the SD3814 family this is value 16 of 21, in a range from 0.36 uH to 3814 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
What is the Volt-us column?
The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.
Is the part suitable for a switching converter?
Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd