Eaton SD53-2R0-R 2 uH Drum Core Inductor 23 mOhm
Eaton SD53-2R0-R 2 uH Drum Core Inductor 23 mOhm

Eaton SD53-2R0-R 2 uH Drum Core Inductor 23 mOhm

Share
SD53-2R0-R: shielded drum core inductor, 2 uH , 2.64 A Irms, Isat 3.3 A, DCR 23 mOhm.
    • Product Details
    • Download

    Eaton SD53-2R0-R 2 uH Drum Core Inductor 23 mOhm

    SD53-2R0-R at a glance: shielded drum core inductor, 2 uH , 2.64 A Irms, Isat 3.3 A, DCR 23 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSD53-2R0-R
    Inductance2 uH
    DCR typical @ +20 °C23 mOhm
    DCR maximum @ +20 °C27 mOhm
    Irms (DC, 40 °C rise)2.64 A
    Isat3.3 A
    K-factor35
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4149

    Dimensions and Pad Layout

    SD53-2R0-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4149: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A shielded drum core inductor: the winding sits on a drum-shaped ferrite core and a shield sleeve closes the magnetic path around it. That is what keeps the radiated field low enough to place the part next to other circuitry.

    At 2.64 A the winding dissipates about 0.16 W in copper using the typical DCR of 23 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 10.9 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 35 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD53 family this is value 2 of 12, in a range from 1.1 uH to 100 uH.

    Where This Series Fits

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: desktop computers; notebook and laptop regulators; led and white led drivers; digital cameras, media devices; battery power systems.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message