Eaton SD6030-151-R 144 uH Drum Core Inductor 608000 mOhm
Eaton SD6030-151-R 144 uH Drum Core Inductor 608000 mOhm

Eaton SD6030-151-R 144 uH Drum Core Inductor 608000 mOhm

Share
SD6030-151-R: shielded drum core inductor, 144 uH , 0.64 A Irms, Isat 0.35 A, DCR 608000 mOhm.
    • Product Details
    • Download

    Eaton SD6030-151-R 144 uH Drum Core Inductor 608000 mOhm

    SD6030-151-R at a glance: shielded drum core inductor, 144 uH , 0.64 A Irms, Isat 0.35 A, DCR 608000 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSD6030-151-R
    Inductance144 uH
    DCR typical @ +20 °C608000 mOhm
    DCR maximum @ +20 °C730000 mOhm
    Irms (DC, 40 °C rise)0.64 A
    Isat0.35 A
    K-factor5
    Package6 x 6 x 3 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4314

    Mechanical Dimensions & Pad Layout

    SD6030-151-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4314: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    The drum core concentrates the flux and the shield closes the return path, so this family behaves more like a closed-core part than an open drum while keeping the inductance-per-volume advantage of a wound component.

    At 0.64 A the winding dissipates about 249 W in copper using the typical DCR of 608000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 8.85 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 5 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD6030 family this is value 21 of 29, in a range from 2.7 uH to 659 uH.

    What This Family Is For

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: notebook, laptop computers; digital cameras; led drivers; tft lcd bias supplies; wireless handsets.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products