
| Parameter | Value |
|---|---|
| Orderable part number | SD6030-221-R |
| Inductance | 211 uH |
| DCR typical @ +20 °C | 1000000 mOhm |
| DCR maximum @ +20 °C | 1200000 mOhm |
| Irms (DC, 40 °C rise) | 0.5 A |
| Isat | 0.3 A |
| K-factor | 4 |
| Package | 6 x 6 x 3 mm |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4314 |

Drawing reproduced from Eaton Technical Data 4314: outline with
rated mm dimensions, pad layout and marking.
This is the classic shielded SMD drum inductor: ferrite drum, wound coil, shield sleeve, tinned terminations. It is the workhorse part for DC-DC converters that need a few microhenry at a few amps.
At 0.5 A the winding dissipates about 250 W in copper using the typical DCR of 1000000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 9.49 uJ at the saturation point, which is the energy available to bridge a load step.
The K-factor of 4 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.
Within the SD6030 family this is value 23 of 29, in a range from 2.7 uH to 659 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
What does the shield actually do?
It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.
What is the Volt-us column?
The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.
What does the shield actually do?
It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd