
| Parameter | Value |
|---|---|
| Orderable part number | SD6030-440-R |
| Inductance | 44 uH |
| DCR typical @ +20 °C | 185000 mOhm |
| DCR maximum @ +20 °C | 250000 mOhm |
| Irms (DC, 40 °C rise) | 1.1 A |
| Isat | 0.62 A |
| K-factor | 7.9 |
| Package | 6 x 6 x 3 mm |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4314 |

Drawing reproduced from Eaton Technical Data 4314: outline with
rated mm dimensions, pad layout and marking.
Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.
At 1.1 A the winding dissipates about 224 W in copper using the typical DCR of 185000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 8.46 uJ at the saturation point, which is the energy available to bridge a load step.
The K-factor of 7.9 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.
Within the SD6030 family this is value 15 of 29, in a range from 2.7 uH to 659 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
Is the part suitable for a switching converter?
Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
What does the shield actually do?
It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd