
| Parameter | Value |
|---|---|
| Orderable part number | SD6030-4R2-R |
| Inductance | 4.1 uH |
| DCR typical @ +20 °C | 23000 mOhm |
| DCR maximum @ +20 °C | 31000 mOhm |
| Irms (DC, 40 °C rise) | 3.11 A |
| Isat | 2.2 A |
| K-factor | 27 |
| Package | 6 x 6 x 3 mm |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4314 |

Drawing reproduced from Eaton Technical Data 4314: outline with
rated mm dimensions, pad layout and marking.
This is the classic shielded SMD drum inductor: ferrite drum, wound coil, shield sleeve, tinned terminations. It is the workhorse part for DC-DC converters that need a few microhenry at a few amps.
At 3.11 A the winding dissipates about 222 W in copper using the typical DCR of 23000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 9.92 uJ at the saturation point, which is the energy available to bridge a load step.
The K-factor of 27 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.
Within the SD6030 family this is value 3 of 29, in a range from 2.7 uH to 659 uH.
The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.
Why is Isat lower than Irms on some rows?
They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.
Is the part suitable for a switching converter?
Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.
What is the Volt-us column?
The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd