Eaton SD7030-100-R 10 uH Shielded Inductor, 2.1 A
Eaton SD7030-100-R 10 uH Shielded Inductor, 2.1 A

Eaton SD7030-100-R 10 uH Shielded Inductor, 2.1 A

Share
SD7030-100-R: shielded drum core inductor, 10 uH , 2.1 A Irms, Isat 1.7 A, DCR 54000 mOhm.
    • Product Details
    • Download

    Eaton SD7030-100-R 10 uH Shielded Inductor, 2.1 A

    SD7030-100-R at a glance: shielded drum core inductor, 10 uH , 2.1 A Irms, Isat 1.7 A, DCR 54000 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberSD7030-100-R
    Inductance10 uH
    DCR typical @ +20 °C54000 mOhm
    DCR maximum @ +20 °C65000 mOhm
    Irms (DC, 40 °C rise)2.1 A
    Isat1.7 A
    K-factor11
    Package7 x 7 x 3 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4330

    Outline Drawing

    SD7030-100-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4330: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    The drum core concentrates the flux and the shield closes the return path, so this family behaves more like a closed-core part than an open drum while keeping the inductance-per-volume advantage of a wound component.

    At 2.1 A the winding dissipates about 238 W in copper using the typical DCR of 54000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 14.4 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 11 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD7030 family this is value 8 of 30, in a range from 1.5 uH to 677 uH.

    Series Positioning

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: notebook, laptop computers; digital cameras; led drivers; tft lcd bias supplies; wireless handsets.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products