Eaton SD7030-121-R 115 uH SMD Power Inductor
Eaton SD7030-121-R 115 uH SMD Power Inductor

Eaton SD7030-121-R 115 uH SMD Power Inductor

Share
SD7030-121-R: shielded drum core inductor, 115 uH , 0.67 A Irms, Isat 0.5 A, DCR 629000 mOhm.
    • Product Details
    • Download

    Eaton SD7030-121-R 115 uH SMD Power Inductor

    SD7030-121-R at a glance: shielded drum core inductor, 115 uH , 0.67 A Irms, Isat 0.5 A, DCR 629000 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberSD7030-121-R
    Inductance115 uH
    DCR typical @ +20 °C629000 mOhm
    DCR maximum @ +20 °C755000 mOhm
    Irms (DC, 40 °C rise)0.67 A
    Isat0.5 A
    K-factor3.3
    Package7 x 7 x 3 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4330

    Outline Drawing

    SD7030-121-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4330: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.

    At 0.67 A the winding dissipates about 282 W in copper using the typical DCR of 629000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 14.4 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 3.3 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD7030 family this is value 21 of 30, in a range from 1.5 uH to 677 uH.

    Where This Series Fits

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: notebook, laptop computers; digital cameras; led drivers; tft lcd bias supplies; wireless handsets.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message