Eaton SD7030-220-R 21 uH Shielded Inductor, 1.4 A
Eaton SD7030-220-R 21 uH Shielded Inductor, 1.4 A

Eaton SD7030-220-R 21 uH Shielded Inductor, 1.4 A

Share
SD7030-220-R: shielded drum core inductor, 21 uH , 1.4 A Irms, Isat 1.2 A, DCR 107000 mOhm.
    • Product Details
    • Download

    Eaton SD7030-220-R 21 uH Shielded Inductor, 1.4 A

    SD7030-220-R at a glance: shielded drum core inductor, 21 uH , 1.4 A Irms, Isat 1.2 A, DCR 107000 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberSD7030-220-R
    Inductance21 uH
    DCR typical @ +20 °C107000 mOhm
    DCR maximum @ +20 °C128000 mOhm
    Irms (DC, 40 °C rise)1.4 A
    Isat1.2 A
    K-factor7.6
    Package7 x 7 x 3 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4330

    Dimensions and Pad Layout

    SD7030-220-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4330: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is the classic shielded SMD drum inductor: ferrite drum, wound coil, shield sleeve, tinned terminations. It is the workhorse part for DC-DC converters that need a few microhenry at a few amps.

    At 1.4 A the winding dissipates about 210 W in copper using the typical DCR of 107000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 15.1 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 7.6 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD7030 family this is value 12 of 30, in a range from 1.5 uH to 677 uH.

    Positioning in the Range

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: notebook, laptop computers; digital cameras; led drivers; tft lcd bias supplies; wireless handsets.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products