Eaton SD7030-681-R 677 uH Shielded Inductor, Isat 0.21 A
Eaton SD7030-681-R 677 uH Shielded Inductor, Isat 0.21 A

Eaton SD7030-681-R 677 uH Shielded Inductor, Isat 0.21 A

Share
SD7030-681-R: shielded drum core inductor, 677 uH , 0.28 A Irms, Isat 0.21 A, DCR 3206000 mOhm.
    • Product Details
    • Download

    Eaton SD7030-681-R 677 uH Shielded Inductor, Isat 0.21 A

    SD7030-681-R at a glance: shielded drum core inductor, 677 uH , 0.28 A Irms, Isat 0.21 A, DCR 3206000 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSD7030-681-R
    Inductance677 uH
    DCR typical @ +20 °C3206000 mOhm
    DCR maximum @ +20 °C3847000 mOhm
    Irms (DC, 40 °C rise)0.28 A
    Isat0.21 A
    K-factor1.4
    Package7 x 7 x 3 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4330

    Dimensions and Pad Layout

    SD7030-681-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4330: outline with
    rated mm dimensions, pad layout and marking.

    The Figures Explained

    Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.

    At 0.28 A the winding dissipates about 251 W in copper using the typical DCR of 3206000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 14.9 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 1.4 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD7030 family this is value 30 of 30, in a range from 1.5 uH to 677 uH.

    Series Positioning

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: notebook, laptop computers; digital cameras; led drivers; tft lcd bias supplies; wireless handsets.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    What is the Volt-us column?
    The applied volt-time product that produces a defined core loss. It is the figure to compare against the converter waveform at the switching frequency.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products