Eaton SD8328-150-R 14.5 uH Drum Core Inductor 53000 mOhm
Eaton SD8328-150-R 14.5 uH Drum Core Inductor 53000 mOhm

Eaton SD8328-150-R 14.5 uH Drum Core Inductor 53000 mOhm

Share
SD8328-150-R: shielded drum core inductor, 14.5 uH , 2.35 A Irms, Isat 2 A, DCR 53000 mOhm.
    • Product Details
    • Download

    Eaton SD8328-150-R 14.5 uH Drum Core Inductor 53000 mOhm

    SD8328-150-R at a glance: shielded drum core inductor, 14.5 uH , 2.35 A Irms, Isat 2 A, DCR 53000 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberSD8328-150-R
    Rated inductance15 uH
    OCL (open circuit inductance)14.5 uH
    DCR typical @ +20 °C53000 mOhm
    DCR maximum @ +20 °C69000 mOhm
    Irms (DC, 40 °C rise)2.35 A
    Isat2 A
    K-factor7.2
    Package9.5 x 8.3 x 3 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4140

    Mechanical Drawing

    SD8328-150-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4140: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    The drum core concentrates the flux and the shield closes the return path, so this family behaves more like a closed-core part than an open drum while keeping the inductance-per-volume advantage of a wound component.

    At 2.35 A the winding dissipates about 293 W in copper using the typical DCR of 53000 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 29 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 7.2 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD8328 family this is value 6 of 11, in a range from 2.7 uH to 97 uH.

    What This Family Is For

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: buck or boost inductor; noise filtering output filter chokes; notebook and laptop power/display; lcd monitors/displays/televisions; battery chargers, lcd bias supplies.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products