Eaton SD8350-1R8-R 1.5 uH Drum Core Inductor 11800 mOhm
Eaton SD8350-1R8-R 1.5 uH Drum Core Inductor 11800 mOhm

Eaton SD8350-1R8-R 1.5 uH Drum Core Inductor 11800 mOhm

Share
SD8350-1R8-R: shielded drum core inductor, 1.5 uH , 5.5 A Irms, Isat 9.1 A, DCR 11800 mOhm.
    • Product Details
    • Download

    Eaton SD8350-1R8-R 1.5 uH Drum Core Inductor 11800 mOhm

    SD8350-1R8-R at a glance: shielded drum core inductor, 1.5 uH , 5.5 A Irms, Isat 9.1 A, DCR 11800 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberSD8350-1R8-R
    Rated inductance1.8 uH
    OCL (open circuit inductance)1.5 uH
    DCR typical @ +20 °C11800 mOhm
    DCR maximum @ +20 °C14000 mOhm
    Irms (DC, 40 °C rise)5.5 A
    Isat9.1 A
    K-factor16
    Package9.5 x 8.3 x 4.5 mm
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4146

    Mechanical Dimensions & Pad Layout

    SD8350-1R8-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4146: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    Shielded drum cores are chosen when the board is dense and the inductor cannot be allowed to radiate. The data sheet gives Irms for the thermal limit and Isat for the inductance rolloff – two different constraints on the same part.

    At 5.5 A the winding dissipates about 357 W in copper using the typical DCR of 11800 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 62.1 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 16 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the SD8350 family this is value 1 of 11, in a range from 1.5 uH to 99.7 uH.

    Series Positioning

    The SD family is the shielded drum core range: SMD parts from about 3 mm to 8 mm, covering sub-microhenry to hundreds of microhenry at currents from a few hundred milliamps to several amps.

    • The shield reduces but does not eliminate the external field. Check the layout against the EMC plan before placing sensitive traces close.
    • Typical applications: server power; notebook and laptop power; high power led driver, portable devices; base station, telecom, and networking; battery chargers, ram power supply.
    • Design note: on a shielded drum the Isat and Irms limits can differ a lot. Size against whichever is lower for the application.

    Frequently Asked Questions

    Is the part suitable for a switching converter?
    Yes within its current and frequency range. Check the core loss at the switching frequency before assuming the DC rating is the limit.

    Why is Isat lower than Irms on some rows?
    They are different limits: Irms is thermal, Isat is magnetic. On a high-inductance part the core saturates before the winding overheats.

    What does the shield actually do?
    It closes the magnetic return path around the drum, which reduces the fringing field that would otherwise couple into nearby traces.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products