
| Parameter | Value |
|---|---|
| Orderable part number | SDCH1V5020-221M-R |
| Inductance | 220 uH ±20% |
| FLL minimum (at Isat) | 114 uH |
| DCR typical @ +20 °C | 2400 mOhm |
| DCR maximum @ +20 °C | 2760 mOhm |
| Irms (DC, 40 °C rise) | 0.3 A |
| Isat | 0.36 A |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1033 |

Drawing reproduced from Eaton Technical Data ELX1033: outline with
rated mm dimensions, pad layout and marking.
The part is a wound coil with a magnetic coating: cheaper than a fully shielded part, quieter than an open drum. Check the Isat column for the transient and the Irms column for the thermal limit.
At 0.3 A the winding dissipates about 0.216 W in copper using the typical DCR of 2400 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.
The core stores about 14.3 uJ at the saturation point, which is the energy available to bridge a load step.
Within the SDCH1V5020 family this is value 14 of 17, in a range from 1 uH to 680 uH.
The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.
Can it be used in an automotive module?
The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.
Can it be used in an automotive module?
The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.
Can it be used in an automotive module?
The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd