Eaton SDCH1V5020-470M-R 47 uH Semi-Shielded Inductor, 0.75 A
Eaton SDCH1V5020-470M-R 47 uH Semi-Shielded Inductor, 0.75 A

Eaton SDCH1V5020-470M-R 47 uH Semi-Shielded Inductor, 0.75 A

Share
SDCH1V5020-470M-R: semi-shielded power inductor, 47 uH ±20%, 0.75 A Irms, Isat 0.82 A, DCR 530 mOhm.
    • Product Details
    • Download

    Eaton SDCH1V5020-470M-R 47 uH Semi-Shielded Inductor, 0.75 A

    SDCH1V5020-470M-R at a glance: semi-shielded power inductor, 47 uH ±20%, 0.75 A Irms, Isat 0.82 A, DCR 530 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberSDCH1V5020-470M-R
    Inductance47 uH ±20%
    FLL minimum (at Isat)24.4 uH
    DCR typical @ +20 °C530 mOhm
    DCR maximum @ +20 °C610 mOhm
    Irms (DC, 40 °C rise)0.75 A
    Isat0.82 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1033

    Outline Drawing

    SDCH1V5020-470M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1033: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    The part is a wound coil with a magnetic coating: cheaper than a fully shielded part, quieter than an open drum. Check the Isat column for the transient and the Irms column for the thermal limit.

    At 0.75 A the winding dissipates about 0.298 W in copper using the typical DCR of 530 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 15.8 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCH1V5020 family this is value 11 of 17, in a range from 1 uH to 680 uH.

    Series Positioning

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Can it be used in an automotive module?
    The commercial SDC parts are not AEC-Q200 qualified. Use the SDCA version where qualification is required.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products