Eaton SDCH1V5040-150M-R 15 uH Semi-Shielded Inductor, 1.8 A
Eaton SDCH1V5040-150M-R 15 uH Semi-Shielded Inductor, 1.8 A

Eaton SDCH1V5040-150M-R 15 uH Semi-Shielded Inductor, 1.8 A

Share
SDCH1V5040-150M-R: semi-shielded power inductor, 15 uH ±20%, 1.8 A Irms, Isat 2 A, DCR 95 mOhm.
    • Product Details
    • Download

    Eaton SDCH1V5040-150M-R 15 uH Semi-Shielded Inductor, 1.8 A

    SDCH1V5040-150M-R at a glance: semi-shielded power inductor, 15 uH ±20%, 1.8 A Irms, Isat 2 A, DCR 95 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberSDCH1V5040-150M-R
    Inductance15 uH ±20%
    FLL minimum (at Isat)7.8 uH
    DCR typical @ +20 °C95 mOhm
    DCR maximum @ +20 °C109 mOhm
    Irms (DC, 40 °C rise)1.8 A
    Isat2 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1033

    Mechanical Drawing

    SDCH1V5040-150M-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1033: outline with
    rated mm dimensions, pad layout and marking.

    How to Read These Ratings

    A semi-shielded power inductor: the winding is covered by a magnetic resin rather than a full metal shield. That damps the fringing field substantially without the cost and mass of a closed shield, and it lets the part be built in a low profile.

    At 1.8 A the winding dissipates about 0.308 W in copper using the typical DCR of 95 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 30 uJ at the saturation point, which is the energy available to bridge a load step.

    Within the SDCH1V5040 family this is value 8 of 17, in a range from 1 uH to 680 uH.

    What This Family Is For

    The SDC family is the semi-shielded range: low-profile SMD inductors from about 2 mm to 6 mm, aimed at compact DC-DC converters where a full shield is not needed.

    • Semi-shielded parts radiate more than closed-shield parts. If the board fails EMC, this is one of the first components to check.
    • Typical applications: dc-dc converters; switching controllers; industrial iot equipment; game consoles; portable electronics.
    • Design note: semi-shielded parts are the compromise between radiated field and cost. Verify the EMC margin early.

    Frequently Asked Questions

    Why quote both Irms and Isat?
    Because they describe different failure modes: overheating and saturation. A design has to satisfy both.

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Is the inductance stable with temperature?
    The tolerance is quoted over the operating range; the drift inside that band is small for a wound ferrite part.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products